Hardware for ADSS Cable

Request a Quote

ADSS dead-end fitting use: The dead-end fitting is mainly used for fixing and anchoring overhead self-supporting ADSS optical cable lines. It is generally installed in terminal towers, tight-line tension towers, corner towers, etc.

Composition: Each set of pre-twisted wire tension clamp components includes: inner stranded wire, outer stranded wire, and pull ring. Users can configure and purchase other connectors according to design requirements. Features: The grip strength of the pre-stranded wire clamp on the conductor (optical cable) can reach more than 95% of the ultimate tensile strength (R.T.S) of the conductor (optical cable), without the influence of stress concentration and vibration stress.

ADSS dead-end fittings, which acts as a strain clamp similar. Mainly used for 50-200m short span corners, tensile strength, terminal and other towers, not only suitable for overhead optical cables, but also for anchoring installation of overhead conductors, pull wires, etc., and used as traction clamps in optical cable construction. Simple structure, quick and convenient installation.

Composition: Single-layer strain clamp is composed of pre-twisted wire, pull ring, U-shaped ring, etc. Single-layer tension clamps can also be made of aluminum-clad steel wire or galvanized steel wire according to the use and user requirements.

ADSS cable guy grips were developed to grip the ADSS fiber optical cable while construction of internet network lines on wood poles or concrete towers.

ADSS Anchor and tension brackets were developed to attach anchor clamps, suspension clamp and other fiting to wooden, metal or concrete poles, walls, houses and constructions during FTTx aerial line deployments.

ADSS Anchor clamp or strain clamp is a tensioner developed to tension all dielectric self-supporting round cables, applied at central loop routes up to 100 meters and last mile installation routes in FTTx, GPON network constructions.

Preformed wire suspension grips were developed to secure and suspension ADSS cable or cables to poles and towers during the construction of telecommunication line.

ADSS suspension clamp is a heavy duty, versatile, and reliable solution for securely suspending ADSS (All Dielectric Self-Support) aerial fiber optic cable. The versatility of the clamp allows the installer to either fix the clamp to the pole using a through bolt or band. If a loose tangent is required, the clamp can be suspended using a standard J-hook. Accepting a range of sizes and multiple installation methods, the GL FIBER ADSS suspension clamp is sure to meet your tangent needs.

Fiber Storage Units (FSU) are used to conveniently store an extra length of cable along the ADSS cable run for later use.