Professional OEM

GL FIBER main optical fiber cables include ADSS cables, OPGW cables, FTTH drop cables, Aerial installation cables, Duct installation cables, Direct buried installation cables, Air blowing installation cables, Biological protection cables, etc.

ISO 9001:2015

Our factory has passed the ISO 9001 international quality certification with perfect quality control system, Talented technical team, Advanced equipment, and our reliable quality.

In the past 20 years, GL FIBER has been providing high quality optical fiber & cables products to telecom Operators, Contractors, ISPs, Trade importers, Resellers, Engineering Firms, OEM customers and various communication projects in more than 190 countries worldwide.

Cases Category
Asia
Africa
America
Other area

Communication Optical Fibre

optical fiber cable,optical cable,fiber cable manufacturer,fiber optic cable supplier

G.657.A1 Bending Insensitive Single-mode Fiber
Request a Quote

GL FIBER^® provides the whole series of SMF products that meet and even excel the requirements of standards on performance indicators. Due to the high stability, these products effectively meet the demand for high speed, large capacity, long distance and small bending radius necessary for signal transmission in different applications.

Product Details

Description:

GL FIBER^® bending insensitive single-mode fibre encompasses all the features of FullBand® fibre and provides good resistance to maro-bending. It has low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-C-L band (1260 -1625 nm). It offers good resistance to additional losses due to low macro-bending in the 1625 nm wavelength region. This not only supports L-band applications but also allows for easy installation without excessive care when storing the fibre, for example, in splicing cassettes. For cable use inside buildings, the fibre supports installation with small cable bending radii and compact organizers.

Application:

Short pitch cables for special application
High performance optical network operating in O-E-S-C-L band
High speed optical routes for Fibre-to-the-Home networks
High speed optical routes in buildings (FTTx)
Cables with low bending requirements

Feature Characteristics:

1. Low attenuation satisfying the operation demand in O-E-S-C-L band
2. Good bending loss resistance at short radius bends
3. Low bending loss for highly demanding cable designs including ribbons
4. Low PMD satisfying high bit-rate and long distance transmission requirements
5. Accurate geometrical parameters that insure low splicing loss and high splicing efficiency

Standard

GL FIBER^® bending insensitive single mode fibre meets or exceeds the ITU-T Recommendation G.652.D/G.657.A1 including the IEC 60793-2-50 type B1.3/B6.a1 Optical Fibre Specification.

Specifications

Characteristics		Conditions	Speciﬁed values	Units
Optical Characteristics
Attenuation		1310nm	≤0.35	[dB/km]
		1383nm(after H2-aging)	≤0.35	[dB/km]
		1460nm	≤0.25	[dB/km]
		1550nm	≤0.21	[dB/km]
		1625nm	≤0.23	[dB/km]
Attenuation vs. Wavelength Max. α diﬀerence		1285-1330nm, in reference to 1310nm	≤0.03	[dB/km]
Attenuation vs. Wavelength Max. α diﬀerence		1525-1575nm, in reference to 1550nm	≤0.02	[dB/km]
Dispersion Coeﬃcient		1285-1340nm	-3.5 to 3.5	[ps/(nm·km)]
		1550nm	≤18	[ps/(nm·km)]
		1625nm	≤22	[ps/(nm·km)]
Zero Dispersion Wavelength(λ0)		--	1300-1324	[nm]
Zero Dispersion Slope(S0)		--	≤0.092	[ps/(nm2·km)]
Typical Value		--	0.086	[ps/(nm2·km)]
PMD	Maximum Individual Fibre	--	≤0.1	[ps/√km]
	Link Design Value（M=20，Q=0.01%)	--	≤0.06	[ps/√km]
	Typical Value	--	0.04	[ps/√km]
Cable Cutoﬀ Wavelength (λCC)		--	≤1260	[nm]
Mode Field Diameter（MFD）		1310nm	8.4-9.2	[μm]
Mode Field Diameter（MFD）		1550nm	9.3-10.3	[μm]
Eﬀective Group Index of Refraction（Neﬀ）		1310nm	1.466	--
Eﬀective Group Index of Refraction（Neﬀ）		1550nm	1.467	--
Point Discontinuities		1310nm	≤0.05	[dB]
Point Discontinuities		1550nm	≤0.05	[dB]
Geometrical Characteristics
Cladding Diameter		--	125.0±0.7	[μm]
Cladding Non-Circularity		--	≤0.7	[%]
Coating Diameter		--	235-245	[μm]
Coating-Cladding Concentricity Error		--	≤12.0	[μm]
Coating Non-Circularity		--	≤6.0	[%]
Core-Cladding Concentricity Error		--	≤0.5	[μm]
Curl(radius)		--	≥4	[m]
Delivery Length		--	Up to 50.4	[km/reel]
Environmental Characteristics		1310nm, 1550nm & 1625nm
Temperature Dependence Induced Attenuation		-60℃ to +85℃	≤0.05	[dB/km]
Temperature-Humidity Cycling Induced Attenuation		-10°C to +85°C, 98% RH	≤0.05	[dB/km]
Watersoak Dependence Induced Attenuation		23°C, for 30 days	≤0.05	[dB/km]
Damp Heat Dependence Induced Attenuation		85°C and 85% RH, for 30 days	≤0.05	[dB/km]
Dry Heat Aging		85℃, for 30 days	≤0.05	[dB/km]
Mechanical Speciﬁcation
Proof Test		--	≥9.0	[N]
		--	≥1.0	[%]
		--	≥100	[kpsi]
		--	--	--
Macro-bend Induced Loss	10 Turns Around a Mandrel of 15 mm Radius	1550nm	≤0.25	[dB]
	10 Turns Around a Mandrel of 15 mm Radius	1625nm	≤1.0	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1550nm	≤0.75	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1625nm	≤1.5	[dB]
Coating Strip Force		typical average force	1.5	[N]
Coating Strip Force		peak force	1.3-8.9	[N]
Dynamic Fatigue Parameter (nd)		--	≥20	-

Please send us your detailed requirements, We will give you a valid quotation within 12 hours!

Hunan GL Technology Co., Ltd

Head Office In Hunan
No.55, Zhaohuilu Road, Yuhua District, Changsha, Hunan, P.R.China.
Facilities In Wuhan
Road Shenglong, Economic and technological development zone. Wuhan, P. R.China.430056
Facilities In Jiangsu
No.128, Xingtang Road, Luotang Street, Jiangyan District, Taizhou City, Jiangshu, China.
+86 731 89722704
8618508406369
sales@gl-fibercable.com